Compaq 12XL500 Models XL300, XL300A, and XL300B - Maintenance & Service Gu - Page 100

Replacing the Processor, Lower the lever to lock the processor in place.

Get Compaq 12XL500 - Presario - Celeron 766 MHz PDF manuals and user guides
UPC - 720591756062
View all Compaq 12XL500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 100 highlights

Presario 1200XL Series Model XL300, XL300A, and XL300B Replacing the Processor To replace the processor, perform the following steps: 1. Fully align the processor pins with the system board connector. Note: When replacing the processor, verify that its number one pin (the gold triangle) is properly aligned with the number one pin (silver triangle) on the system board connector. 2. Press down carefully on the processor directly over the connectors to seat the processor on the system board. 3. Lower the lever to lock the processor in place. 4. Reassemble the remaining components by reversing their removal procedures. PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES REMOVAL SEQUENCE 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
P
RESARIO
N
OTEBOOK
M
AINTENANCE
AND
S
ERVICE
G
UIDE
1200XL S
ERIES
R
EMOVAL
S
EQUENCE
27
Presario 1200XL Series
Model XL300, XL300A, and XL300B
Replacing the Processor
To replace the processor, perform the following steps:
1.
Fully align the processor pins with the system board connector.
Note:
When replacing the processor, verify that its number one pin (the gold triangle) is
properly aligned with the number one pin (silver triangle) on the system board
connector.
2.
Press down carefully on the processor directly over the connectors to seat the
processor on the system board.
3.
Lower the lever to lock the processor in place.
4.
Reassemble the remaining components by reversing their removal procedures.