Compaq 12XL500 Models XL300, XL300A, and XL300B - Maintenance & Service Gu - Page 75
Tool and Software Requirements, Screws, Connectors and Plastic Parts, ZIF Connector - disassembly
UPC - 720591756062
View all Compaq 12XL500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Presario 1200XL Series Model XL300, XL300A, and XL300B Tool and Software Requirements The following items are required to service the Notebook: • Torx T-9 screwdriver • 5mm nut drivers (for screwlocks and standoffs) • Small standard screwdriver • Small Phillips screwdriver • Diagnostics software Screws The screws used in the Notebook are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. Important: As each subassembly is removed from the Notebook, place it away from the work area to prevent damage. Connectors and Plastic Parts Plastic parts can be damaged by the use of excessive force during disassembly and reassembly. When handling plastic parts, use care. Apply pressure only at the points designated in the instructions. Most of the connectors in these Notebooks are ZIF Connectors. 2 REMOVAL SEQUENCE PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES