Compaq 470007-802 Guide to Features&Upgrades Compaq Deskpro EN Series of P - Page 31
When to Recon the Computer, Removing the Computer Cover, Computer Setup.
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
When to Reconfigure the Computer Removing the Computer Cover 7. Install any optional equipment. Refer to the applicable sections of this chapter and to the documentation included with the optional equipment for instructions. 8. Replace the computer cover. 9. Turn on the monitor, computer, and any external devices. 10. Reconfigure the computer, if necessary. 11. If you normally lock the Smart Cover Lock, relock it using Computer Setup. System configuration is the process of specifying the devices and programs that make up a computer system. When you add or remove optional equipment, you must reconfigure the computer to recognize these changes. If you install a plug and play device, Windows 95 automatically recognizes the device and configures the computer. If you install a non-plug and play device, or if the device is not automatically detected after installation, you must reconfigure the computer after completing installation of the hardware. In Windows 95, select the Add New Hardware icon in the Control Panel and follow the instructions on the screen. To reconfigure the computer in Windows NT Workstation 4.0, use the software utility provided with the newly installed hardware. To install optional equipment, you must remove the computer cover to gain access to internal components. The quick release cover latches located on the sides of the computer allow easy removal of the computer cover without the use of tools. To remove the cover, follow these steps: 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock it. 2. Turn off the computer and any external devices. 3-6 Upgrading the Computer