Compaq 470007-802 Guide to Features&Upgrades Compaq Deskpro EN Series of P - Page 43

If you have installed a hard drive that is not a plug and, of drive rails.

Page 43 highlights

7. Pull the locking lever on the left side of the drive to the left. Slide the drive to the rear of the bay, then lift the drive from the bay. Removing the Hard Drive  When replacing the hard drive, transfer the four screws from the old drive to the new one. There are two shoulder-head screws on the left side of the drive and two hi-top screws on the right side. The screws take the place of drive rails.  If you have installed a hard drive that is not a plug and play device or that is not automatically recognized by the computer, refer to the "When to Reconfigure the Computer" section of this chapter. 3-18 Upgrading the Computer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

3-18
Upgrading the Computer
7.
Pull the locking lever on the left side of the drive to the left.
Slide the drive to the rear of the bay, then lift the drive
from the bay.
Removing the Hard Drive
When replacing the hard drive, transfer the four screws
from the old drive to the new one. There are two
shoulder-head screws on the left side of the drive and two
hi-top screws on the right side. The screws take the place
of drive rails.
If you have installed a hard drive that is not a plug and
play device or that is not automatically recognized by the
computer, refer to the “When to Reconfigure the
Computer” section of this chapter.