Compaq 470007-802 Deskpro EN Series of Personal Computers Maintenance and Serv - Page 51
Removing an External 5.25-Inch Drive, Remove the front bezel
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4.11.2 Removing an External 5.25-Inch Drive 1. Prepare the computer for disassembly (Section 4.2). WARNING: Power is continuous to the system board and power supply even when the power switch is turned off. To prevent damage to the unit, disconnect the power cord from the power source or the unit before beginning disassembly procedures. 2. Lay the computer down on its large base (side with feet) for greater stability. 3. Remove the access panel (Section 4.6). 4. Remove the front bezel (Section 4.7). 5. If this is a desktop, push down on drivelock 1 to release the drive; if a minitower, press drivelock 2. Releasing the Drives 4-14 Removal and Replacement Procedures
4-14
Removal and Replacement Procedures
4.11.2
Removing an External 5.25-Inch Drive
1.
Prepare the computer for disassembly (Section 4.2).
WARNING:
Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2.
Lay the computer down on its large base (side with feet) for greater stability.
3.
Remove the access panel (Section 4.6).
4.
Remove the front bezel (Section 4.7).
5.
If this is a desktop, push down on drivelock
1
to release the drive; if a minitower, press
drivelock
2
.
Releasing the Drives