Compaq 470007-802 Deskpro EN Series of Personal Computers Maintenance and Serv - Page 55
Removing the Drivelocks
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
To replace the drive, reverse the previous procedures. ✎ The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is the bottom bay in the minitower and the topmost bay in the desktop configuration. When replacing the drive, use the existing screws. Metric screws (M3) have a black finish while U.S. screws (#6) have a silver finish. CAUTION: When servicing the computer, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. 4.12 Removing the Drivelocks The computer chassis contains two drivelock mechanisms. Drivelock 1 secures the external drives in the desktop configuration, drivelock 2 secures all drives in the minitower and the internal drives in the desktop configuration. 4-18 Removal and Replacement Procedures