Compaq Armada 6500 Armada 6500 Reference Guide - Page 48
If you need to, manually con a device, it is recommended that you use the System
View all Compaq Armada 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Configuring Your Notebook Continued Field Serial Port Settings Disabled Enabled Infra-Red Port Auto* Disabled Enabled Auto* Parallel Port Disabled Enabled Auto* Parallel Port Mode Output only Bi-directional* ECP (Extended Capabilities Port) EPP (Enhanced Parallel Port) *Factory default setting Comments Disables the onboard Serial Port. Enables and allows you to manually configure the I/O address and Interrupt Request (IRQ) line for the Serial Port. Enables and automatically configures the Serial Port. Disables the onboard Infrared Port. Enables and allows you to manually configure the operating mode, I/O address and Interrupt Request (IRQ) line, and DMA channel for the Infrared Port. Enables and automatically configures the Infrared Port. You must manually configure the operating mode. Disables the onboard Parallel Port. Enables and allows you to manually configure I/O address, Interrupt Request (IRQ) line and DMA channel (if ECP is selected for Parallel Port Mode) for the Infrared Port. Enables and automatically configures the Parallel Port. Select the mode supported by your printer. See your printer's User Guide for details. Note It is highly recommended that you use the Auto configure setting. If you need to manually configure a device, it is recommended that you use the "System" application located in the Windows "Control Panel 4-6