Compaq Armada 6500 Armada 6500 Reference Guide - Page 59
Installing Memory, Gently press the module down until it snaps into place
View all Compaq Armada 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Memory Upgrades 4. Align the notch in the 3.3v SDRAM memory module with the plastic tab in the memory cradle (Figure 5-2, step 1). 5. Install the memory module by inserting it at an angle of approximately 45 degrees into one of the two sockets (Figure 5-2, step 2). 6. Gently press the module down until it snaps into place (Figure 5-2, step 3). 7. Replace the memory compartment cover and press around the edges to make sure it is properly seated. Figure 5-2 Installing Memory DEC01609 5-3
Memory Upgrades
5-3
4.
Align the notch in the 3.3v SDRAM memory module with the plastic tab in the memory
cradle (Figure 5-2, step 1).
5.
Install the memory module by inserting it at an angle of approximately 45 degrees into
one of the two sockets (Figure 5-2, step 2).
6.
Gently press the module down until it snaps into place (Figure 5-2, step 3).
7.
Replace the memory compartment cover and press around the edges to make sure it is
properly seated.
DEC01609
Figure 5-2
Installing Memory