Compaq Armada 7300 33.6Kbps Modem Commands for Armada 7000 Family of Personal - Page 12

: 3 +,7( $3(5 (cont.) NOTE: In pulse dialing, characters A, B, C, D, and # are ignored. . . . Determine Data Rate Negotiation (N) . . . This command determines if the modem performs rate negotiated handshake with remote modem at connection. . . Parameters: 0, 1 . . . . n = 0 . . Automode disabled; handshake only at the rate specified by the DTE rate. S37, *H, and the J dial modifier. . . n = 1 . . Automode enabled; handshake at or below the rate specified by the DTE rate. S37, *H, and the J dial modifier (Default). . . Dial Command (D) . . This command causes the modem to dial the number that follows D in the command line. . . . Identification/Checksum Option (I) . This command interrogates the modem for its product code, checksum, or ROM revision . . code. . Parameters: 0, 1, 2, 3, 9 . . . . n = 0 Requests product code (Default). . . n = 1 Requests control firmware checksum (8 bit). . . n = 2 . Verifies control firmware checksum; responds OK or ERROR result code. . n = 3 . . . . . Requests ROM revision code formatted as: XXXXXX NNN PASS (data pump date and revision code) XXXXXX NNN PASS (ASIC date and revision code) XXXXXX NNN PASS (control firmware date and revision code). The date codes are in yymmdd format, and . the revision codes are 3-digit numbers. . . n = 9 . . Requests ROM revision and country code. For example, Compaq N.NN USA where N.NN defines the revision code for the ROM and reports the selected . DAA. . . Long Space Disconnect (Y) . . This command enables/disables the generation and response to long space disconnect. . . Parameters: 0, 1 . . n = 0 Disables long space disconnect (Default). . . n = 1 Enables long space disconnect. . . . .