Compaq Armada 7300 33.6Kbps Modem Commands for Armada 7000 Family of Personal - Page 4
Using Online Mode, Escaping from an Online Session to the Command Mode, Creating a Command Mode
View all Compaq Armada 7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
: 3 +,7( $3(5 (cont.) NOTE: Numeric characters are followed by a carriage return. NOTE: The word modem comes from the process of MOdulation/ DEModulation. NOTE: The escape code sequence (+++) must be typed within one second, or as defined in the Escape Code Guard Time found in S12. NOTE: To hang up the modem, type ATH0 and press Enter. . . . . . V0 for numeric characters. . . . . Using Online Mode . . . In the online mode, the transmitting modem receives characters from the computer, converts the data to analog signals then transmits these signals over the telephone line. . . . The process of altering a signal for transmission is called modulation. The receiving modem receives analog signals from the telephone when in the online mode and converts or demodulates . the signal, returning it to the digital form that can be used by the computer. . . . Escaping from an Online Session to the Command Mode . . Use the following steps to break out of a data transfer session (online mode) and return to . command mode: . . Press and hold the Shift key and type +++ . . An OK result code is displayed. . . Enter modem commands as needed. . . . Resume online session by entering AT0 command or terminate the connection with the ATH0 command. . . . Creating a Command Mode Shortcut . . An easy way to issue commands to the modem is via HyperTerminal, included with Windows 95 . and Windows NT. You can create a shortcut for accessing HyperTerminal and sending . commands to the modem. To create a command mode shortcut on the Windows desktop: . . 1. Create a Command Mode icon. . . 2. From the HyperTerminal dialog box, click the Command icon. . . . 3. Click File==>Create Shortcut or . Click the right mouse button. . . A Command Mode Shortcut icon is displayed. . 4. Click and drag the shortcut icon to the desktop. . . 5. To quit HyperTerminal, click File==>Exit. . . . . . . . . . . . . .