Compaq Armada 7300 33.6Kbps Modem Commands for Armada 7000 Family of Personal - Page 37
Start Facsimile Data Mode -SFX
View all Compaq Armada 7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
: 3 +,7( $3(5 (cont.) . . Start Modem Data Mode (-SDA) . . . This command initiates the transmission of the modem data mode start sequence and causes the DCE to switch to modem data mode. . . . Start Facsimile Data Mode (-SFX) . This command initiates the transmission of the fax data mode start sequence and causes the . DCE to switch to fax data mode. . . . . . Capabilities Query Response Control (SQR=n) . This command controls the response to a capabilities query. . . Parameters: 0,1 . . n = 0 . One-way response. . n = 1 Two-way response. . . . Set Capabilities Data (-SCD=n) . This command is used to read, add to, or establish the contents of the DCE's capabilities . data structure. The capabilities elements (n) consist of pairs of hexadecimal numbers and . . specify the capabilities information. . AT-SCD? Reads the current capabilities. . . . Error Reporting (-SER?) . . This command asks the DCE for an error report. The DCE responds with either 0 (no error . found) or a pair of hexadecimal digits representing the error byte. . . . Set VoiceView Transmission Speeds (- . . SSp=x, y, z) . This command specifies the data modulation schemes that are associated with the . VoiceView mode tones. The digits of the compound value represent burst speed (x), . recovery speed (y), and priority speed (z). . . Parameters: 1-7 . . Default : (0, 1, 2) . . n = 0 V.21 300 bps FSK . . n = 1 V.27ter 4800 bps DPSK . . n = 2 V.29 9600 bps QAM . n = 3 V.29 4800 bps QAM . . n = 4 V.17 7200 bps TCM . . n = 5 V.17 9600 bps TCM . n = 6 . V.17 12000 bps TCM . n = 7 V.17 14400 bps TCM . .