Compaq Armada 7300 33.6Kbps Modem Commands for Armada 7000 Family of Personal - Page 13

: 3 +,7( $3(5 (cont.) . . . Negotiation Progress Result Code (W) . . This command determines whether or not to return negotiation progress result codes. . Parameters: 0, 1, 2 . . . n = 0 . DTE speed on CONNECT; CARRIER and PROTOCOL disabled (Default). . . n = 1 . DTE speed on CONNECT; CARRIER and PROTOCOL enabled. . n = 2 DCE speed on CONNECT; CARRIER and PROTOCOL . disabled. . . . Online Data Mode (O) . This command forces the modem to the online data mode. Use this command to return to the . . online mode after "escaping" to the command mode. . Parameters: 0, 1, 3 . . . n = 0 Enters online data mode. . n = 1 Enters online data mode with a retrain. . . n = 3 Enters online data mode with a rate renegotiation. . . . Read/Write an S Register (S) . This command sets the register r to the specified value n. . . The Sr? command reads (displays) the value in register r. . . Parameters: . . Range (r): 0-110 . . Range (n): register specific . . Recall Stored Profile (Z) . . . This command resets the modem, recalls the specified user profile from nonvolatile memory (NVRAM), and places it in the active configuration area. . . Parameters: 0, 1 . . n = 0 Reset modem and recall parameters stored in user . profile 0. . . n = 1 . Reset modem and recall parameters stored in user profile 1. . . Repeat Last Command (A/)- . . . This command causes the modem immediately to repeat the previous command such as redialing a telephone number. The previously executed command remains in the command . buffer until AT is entered or power is turned off. Both actions clear the buffer and make the . A/ command invalid since there is no command to repeat. It is not necessary to enter either a . or AT. . . .