Compaq ProLiant 8500 Compaq ProLiant 8500 I/O Module Upgrade Guide - Page 10
Updating the System Partition with Compaq Server Diagnostics, Enter, Spacebar
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6 Compaq ProLiant 8500 Server I/O Module Upgrade Guide Updating the System Partition with Compaq Server Diagnostics Compaq Server Diagnostics will be updated on the system partition. This step is necessary, or Compaq Server Diagnostics would have to be run from the diskette each time. To install Compaq Server Diagnostics onto the system partition, perform the following steps: 1. Reboot the server. 2. At the end of the Power On Self-Test (POST), press F10 to access the Compaq System Configuration screen. 3. Press Enter at the Compaq logo screen to access the Main Menu. 4. Insert the Compaq Server Diagnostics diskette into your diskette drive. 5. At the Main Menu, select the System Configuration option. 6. Select System Partition at the System Configuration screen. 7. Select Upgrade System Partition at the System Partition screen. 8. Select Compaq Diagnostics from the Upgrade Utility Selection Panel by pressing the Spacebar to place an X next to it. 9. Press Enter to complete the update. 10. Exit all the way back to the Main Menu screen by pressing ESC from each of the opened menus. 11. Remove the Compaq Server Diagnostics diskette from the server. 12. Insert the ProLiant 8500 I/O Module Upgrade Kit Migration diskette. 13. Continue with the "Updating the System Dispatcher Utility and Migrating the System" section of this guide.