Compaq ProLiant 8500 Compaq ProLiant 8500 I/O Module Upgrade Guide - Page 15
Transferring I/O Expansion Boards Between I/O Modules
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Compaq ProLiant 8500 Server I/O Module Upgrade Guide 11 Transferring I/O Expansion Boards Between I/O Modules This section provides instructions on removing I/O expansion boards from your current I/O module and installing them into the new I/O module provided with this kit. NOTE: Before installing the I/O expansion boards into the new I/O module, make sure that the PCI/PCI-X expansion slot will support the I/O expansion board. For detailed PCI/PCI-X expansion slot information, see the "Supported I/O Expansion Boards" section of this guide. Removing PCI Expansion Boards from Slots 1 Through 9 1. Open the air baffle . 2. Press down on the top of the PCI expansion slot release lever , and open the lever toward the rear of the expansion slot . 3. Lift the PCI expansion board out of the slot . 2 4 3 1 Figure 4. Removing PCI expansion boards from slots 1 through 9 4. Perform steps 1 through 3 for all PCI expansion boards in slots 1 through 9, if installed.