D-Link DAP-1525 Product Manual - Page 24
LAN Setup - default ip
View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 3 - Configuration LAN Setup This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection Use the drop-down menu to select Static IP. Type: IPv4 Address: If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask. The default subnet mask is 255.255.255.0. Default Gateway: Enter the default gateway IP address. Primary DNS Server: Enter the primary DNS server IP address. Secondary DNS Enter the secondary DNS server IP address. Server: My IPv6 Use the drop-down menu to select the IPv6 mode Connection is: connected to the IPv6 Internet. D-Link DAP-1525 User Manual 24