D-Link DAP-1525 Product Manual - Page 67

Con WPA-Enterprise (AP Mode

Get D-Link DAP-1525 PDF manuals and user guides View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Section 4 - Security Configure WPA-Enterprise (AP Mode) It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the bridge (192.168.0.50). Click on Setup and then click Wireless Settings on the left side. 2. Next to Security Mode in the Wireless Security Mode section, select Enable WPA/WPA2 Wireless Security. 3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type dropdown menu. If you have wireless clients that use both types, use TKIP/AES. 4. Select EAP from the PSK / EAP drop-down menu 5. Enter the IP Address of your RADIUS server in the RADIUS Server IP Address field. 6. Enter the port you are using with your RADIUS server in the Port field. 7. Enter the security key in the Shared Secret field. 8. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-1525 User Manual 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
67
D-Link DAP-1525 User Manual
Section 4 - Security
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the bridge (192.168.0.50).
Click on
Setup
and then click
Wireless Settings
on the left side.
2. Next to
Security Mode in the Wireless Security Mode section
, select
Enable WPA/WPA2 Wireless Security.
3. Select
Auto(TKIP/AES), TKIP, or AES
from the Cipher Type drop-
down menu. If you have wireless clients that use both types, use
TKIP/AES.
4. Select
EAP
from the
PSK / EAP
drop-down menu
5. Enter the IP Address of your RADIUS server in the RADIUS Server IP
Address field.
6. Enter the port you are using with your RADIUS server in the
Port
field.
7. Enter the security key in the
Shared Secret
field.
8. Click
Save Settings
at the top of the window to save your settings. If you are configuring the access point with a wireless
adapter, you will lose connectivity until you enable WPA on your adapter and enter the same passphrase as you did on the
access point.
Configure WPA-Enterprise (AP Mode)