D-Link DAP-1525 Product Manual - Page 50
Lan Setup - bridge setup
View all D-Link DAP-1525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Section 3 - Configuration Lan Setup This section will allow you to change the local network settings of the bridge and to configure the Static settings. Device Name: Enter the Device Name of the AP and click Next to continue. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Use the drop-down menu to select Static IP if your ISP Connection assigned you the IP address, subnet mask, gateway, Type: and DNS server addresses. Select Dynamic IP (DHCP) to automatically assign an IP address to the computers on the LAN/private network. IPv4 Address: Enter the IP address assigned by your ISP. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Default Enter the Gateway assigned by your ISP. Gateway: Primary DNS Enter the primary DNS server IP address. Server: Secondary DNS Enter the secondary DNS server IP address. Server: My IPv6 Select the mode you would like the router to use to Connection: connect to the IPv6 Internet from the drop-down menu. D-Link DAP-1525 User Manual 50