D-Link DAP-2310 DAP-2310 User Manual - Page 14
Getting Started - configure without connecting lan
View all D-Link DAP-2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Section 2 - Installation Getting Started Desktop Laptop DAP-2310 RESET LAN 5V 2A 2 1 Switch 1. Connect the power adapter to the receptor on the rear panel of the DAP-2310 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation. 2. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-2310 and the other RESET LAN 5V 2A end of the cable to a switch or router's LAN port . Note: You can also connect the DAP-2310 diroerctly to the computer that will be used for configuration. The LAN LED will illuminate to indicate a proper Ethernet connection. 3. Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310. D-Link DAP-2310 User Manual 14