D-Link DAP-2310 DAP-2310 User Manual - Page 21
WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP.
View all D-Link DAP-2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Section 3 - Configuration WDS mode In WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: Select 2.4GHz from the drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name Service Set Identifier (SSID) is the name designated (SSID): for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. Auto Channel Enabling this feature automatically selects the Selection: channel that will provide the best wireless performance. This feature is not supported in WDS mode. Channel: All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection. Channel Width: Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Remote AP Enter the MAC addresses of the APs on your MAC Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-2310 User Manual 21