D-Link DAP-2310 DAP-2310 User Manual - Page 17
Basic Settings, Wireless, Access Point mode - wireless n access point
View all D-Link DAP-2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Section 3 - Configuration Basic Settings Wireless Access Point mode Wireless Band: Select 2.4GHz from the drop-down menu. Mode: Select Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name Service Set Identifier (SSID) is the name designated (SSID): for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive. SSID Visibility: Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. This feature is enabled by default. Auto Channel Enabling this feature automatically selects Selection: the channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs when the AP is booting up. Channel: All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-2310 User Manual 17