D-Link DAP-2310 DAP-2310 User Manual - Page 15
Configuration - web browser cannot connect
View all D-Link DAP-2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Section 3 - Configuration Configuration To configure the DAP-2310, use a computer that is connected to the DAP-2310 with an Ethernet cable (see the Network Layout diagram). Launch your web browser. Type the IP address of the DAP-2310 in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-2310 and your computer are in the same subnet. Note: If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password field blank by default and click Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2310 User Manual 15
15
D-Link DAP-2310 User Manual
Section 3 - Configuration
Configuration
To configure the DAP-2310, use a computer that is connected to the DAP-2310 with an Ethernet cable (see the
Network Layout
diagram
).
Launch your web browser.
Type
the IP address of the DAP-2310 in the address field (
) and
press
Enter
. Make sure that the IP addresses of the DAP-2310 and your computer are
in the same subnet.
Note:
If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address.
Enter the user name (
admin
) and your password. Leave the password field blank by default and click
Login
.
Note:
If you have changed the password, make sure to enter the correct password.