D-Link DBS-2000-10 Nuclias Manual - Page 57
With Basic Login Using a RADIUS, Server, 1.6.4 Configuring an SSID Captive Portal, With Third
View all D-Link DBS-2000-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
With Basic Login Page Using a RADIUS Server 1. Navigate to the Configure > Access Point > Profiles page. 2. From the Profile list, click SSID under the Actions column of the Profile of the SSID you wish to edit. 3. From the SSID list, click the SSID name of the SSID you wish to edit. 4. In the SSID configuration window, click the Captive Portal tab. 5. Select Sign-on with basic login page as the Splash page type. 6. Select a basic login page from the drop-down menu. 7. [Optional] Click Splash page editor to open the splash page editor window. Refer to the Splash Page Editor section on page 80 for more information. 8. Select RADIUS as the Basic Login Page type. 9. [Optional] If you have no preconfigured RADIUS servers, click Add a RADIUS server and specify the following information: Host Port Secret Enter the IP address of the RADIUS server. Enter a port for the RADIUS server. The range is between 1 and 65535. Enter a shared secret. 10. Select a primary RADIUS server database from the drop-down menu. 11. [Optional] Select a secondary RADIUS server database from the drop-down menu. 12. Specify the following information: Session Timeout Idle timeout Enter a duration (in minutes) before the connection session automatically times out. Enter a duration (in minutes) of allowed inactivity before the captive portal page times out. 13. Click Save. 14. Click Push Configuration. 8.1.6.4 Configuring an SSID Captive Portal With Third Party Login 1. Navigate to the Configure > Access Point > Profiles page. 49