D-Link DBS-2000-10 Nuclias Manual - Page 76
Performing a Blink LED Test, 2.5.10, Manually Rebooting a Device, 2.5.11, Adding a License Key
View all D-Link DBS-2000-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
2. From the device list, click the device name. 3. Click the Tools tab in the top-right of the screen. 4. In the IP address/FQDA field in the Traceroute section, enter a valid IP address or FQDA. 5. Click Traceroute. 8.2.5.9 Performing a Blink LED Test A blink LED diagnostics test is used to verify the indicator LEDs on the tested device are working correctly. 1. Navigate to the Configure > Access Point > Devices page. 2. From the device list, click the device name. 3. Click the Tools tab in the top-right of the screen. 4. In the Others section, click Start to start the test. Note: The Start button will change to Stop once the test begins. 5. Click Stop to stop the test. 8.2.5.10 Manually Rebooting a Device 1. Navigate to the Configure > Access Point > Devices page. 2. From the device list, click the device name. 3. Click the Tools tab in the top-right of the screen. 4. In the Others section, click Reboot. 8.2.5.11 Adding a License Key to a Device 1. Navigate to the Configure > Access Point > Devices page. 2. From the device list, click the device name. 3. Click the License tab in the top-right of the screen. 4. In the License Table section, click Add License. 5. Enter a valid license key. 6. Click Save. 8.2.5.12 Deleting a License Key From a Device 1. Navigate to the Configure > Access Point > Devices page. 68