D-Link DGS-6600-48TS CLI Guide - Page 406
lldp tlv-select
View all D-Link DGS-6600-48TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
DGS-6604 m lldp tlv-select lldp tlv-select To select optional type-length-value (TLVs) in the 802.1AB basic management set will be transmitted and encapsulated in the LLDPDUs and sent to neighbor devices, use the lldp tlv-select command in Interface Configuration mode. To disable transmit the TLVs, use the no form of this command. lldp tlv-select [port-description | system-capabilities | system-description | system-name] no lldp tlv-select [port-description | system-capabilities | system-description | system-name] Syntax Description port description (Optional) specify the Port description TLV to send. the Port description TLV allows network management to advertise the IEEE 802 LAN station's port description. system-capabilities (Optional) Specify the system capabilities TLV to send. The system capabilities field should contain a bit-map of the capabilities that define the primary functions of the system. system-description (Optional) Specify the system description TLV to send. The system Description should include the full name and version identification of the system's hardware type, software operating system and networking software. system-name (Optional) Specify the system name TLV to send. The system name should be the system's fully qualified domain name. When no optional keyword is selected, all supported optional 802.1AB basic management TLVs are selected or deselected in the no form of this command. Default Command Mode Usage Guideline Examples No optional 802.1AB basic management TLV is selected. Interface Configuration The command is available for physical port configuration. The lldp tlv-select command is used to select the optional TLVs to be transmitted. If the optional TLVs advertisement is selected, they will be encapsulated in LLDPDU and sent to other devices. This example shows how to enable all supported optional 802.1AB basic management TLVs: Switch(config-if)# lldp tlv-select This example shows how to enable advertising System Name TLV: Switch(config-if)# lldp tlv-select system-name This example shows how to disable advertising System Name TLV: CLI Reference Guide 396