Home » D-Link Manuals » Hubs & Switches » D-Link DGS-6600-48TS » Manual Viewer

D-Link DGS-6600-48TS CLI Guide - Page 861

snmp-server host, snmp-server, version, noauth, server user

Get D-Link DGS-6600-48TS PDF manuals and user guides

View all D-Link DGS-6600-48TS manuals

Add to My Manuals
Save this manual to your list of manuals

Page 861 highlights

DGS-6604 m snmp-server host snmp-server host Use the command to specify the recipient of a SNMP notification operation. Use the no command to remove the recipient. snmp-server host {IP-ADDRESS} [version {1| 2c | 3 {auth | noauth | priv }}] WORD [vlaninterface] no snmp-server host {IP-ADDRESS} Syntax Description IP-ADDRESS Name, IPv4 or IPv6 address of the SNMP notification host. version (Optional) Version of the SNMP used to send the traps. The default is 1. If you use the version keyword, one of the following keywords must be specified: • 1 -SNMPv1. This option is not available with informs. • 2c -SNMPv2C. • 3 -SNMPv3. The most secure model, because it allows packet encryption with the priv keyword. One of the following three optional security level keywords can follow the 3 keyword: - auth- Enables Message Digest 5 (MD5) and Secure Hash Algorithm (SHA) packet authentication. - noauth-Specifies that the noAuthNoPriv security level applies to this host. This is the default security level for SNMPv3. - priv-Enables Data Encryption Standard (DES) packet encryption (also called "privacy"). WORD Password-like community string is sent with the notification operation. If the version is 3, The COMMUNITY-STRING is used as the UserName defined by the snmpserver user command. The community string that consists of from 1 to 32 characters. The syntax is general string that does not allow space. vlan-interface When input IP-ADDRESS is IPv6 link-local address, user must choose an existing vlan-interface to specify output interface for a destination. Default Command Mode Usage Guideline No host entry exists. If no version option is specified, the default version is 1. Global configuration at privilege level 15 SNMP notifications are sent as trap packets. If you do not enter an snmp-server host command, no notifications are sent. In order to configure the switch to send SNMP notifications, you must create at least one recipient of a SNMP notification by snmp-server host command. To create an SNMP host where the notification will be sent to, the user can specify the version of notification packet. For V1 and V2 SNMP, the notification will be sent in trap protocol data unit (PDU). For V3 SNMP, the notification will be sent in the SNMPv2-TRAP-PDU with the SNMPv3 header. CLI Reference Guide 851

Section	Page
Preface	3
Version Description	3
Audience	3
Document Organization	3
Other Documentation	3
Conventions	4
Notes, Notices, and Cautions	4
Command Descriptions:	5
Command Modes	5
Command Listing by Feature	11
802.1x	11
AAA	11
Access Control Lists	12
Access Management	12
Basic IPv4	13
Basic IPv6	13
Basic Switch	14
BGP	14
Broadcast Storm	16
Chassis	16
Digital Diagnostic Monitoring (DDM)	16
Dynamic ARP Inspection	17
DHCP Client (IPv6)	17
DHCP Relay (IPv4)	17
DHCP Relay (IPv6)	17
DHCP Server (IPv4)	17
DHCP Server Screening/ Client Filtering	19
DHCP Snooping	19
DoS Prevention	19
DVMRP	19
ERPS	19
Errdisable	20
File System	20
GVRP	20
IGMP	20
IGMP Snooping	21
Interface	21
IP Utility	21
IP Multicast	21
IPv6 Protocol Independent	22
IP Source Guard	22
IPv6 Tunnel	22
Jumbo Frame	22
L2 FDB	22
LACP	23
lldp-med	23
Loopback Detection	24
Management Port	24
Mirror	24
MSTP	24
Network Load Balancing	25
OSPFv2	25
OSPFv3	26
Password Recovery	27
PIM	27
POE	28
Policy-based Route	28
Port Security	28
Power Saving	29
Protocol Independent	29
QoS	29
QinQ (VLAN Tunnel)	30
RIP	30
RIPng	31
RMON	32
Route Map	32
Safeguard	32
sFlow	32
SNMP Management	33
SSH	33
STP	33
Switch Port	34
Syslog	34
System File Management	34
Time and SNTP	35
Traffic Segmentation	35
VLAN	35
VRRP	35
Voice Vlan	36
A	37
aaa authentication	37
aaa authorization	39
aaa group server	40
accept dhcp client-identifier	41
accept dhcp relay-agent	42
acceptable-frame	43
accept-lifetime	44
access vlan	46
address-family ipv4	47
aggregate-address	48
area default-cost	49
area default-cost (IPv6)	50
area nssa	51
area range	53
area range (IPv6)	54
area stub	55
area stub (IPv6)	56
area virtual-link	57
area virtual-link (IPv6)	61
arp	63
arp timeout	64
auto-cost reference-bandwidth	65
auto-cost reference-bandwidth (IPv6)	66
B	67
banner login	67
based-on client-id	69
based-on c-vid	70
based-on interface-ip-address	71
based-on mac-address	72
based-on relay-ip-address	73
based-on s-vid	74
based-on user-class	75
based-on vendor-class	76
bgp always-compare-med	77
bgp asnotation dot	78
bgp bestpath as-path ignore	80
bgp bestpath compare-routerid	82
bgp default ipv4-unicast	83
bgp default local-preference	84
bgp deterministic-med	85
bgp enforce-first-as	86
bgp log-neighbor-changes	87
bgp router-id	88
boot config	89
bootfile	91
boot image	92
C	94
channel-group	94
class	96
class-map	97
clear aaa user lockout	99
clear arp-cache	100
clear counters	101
clear dos prevention counter	102
clear cpu-protect counters	103
clear gvrp statistics interface	104
clear ip bgp	105
clear ip bgp peer-group	107
clear ip dhcp binding	109
clear ip dhcp conflict	111
clear ip dhcp server statistics	113
clear ip ospf	114
clear ipv6 dhcp client	115
clear ipv6 neighbors	116
clear ipv6 ospf process	117
clear ipv6 rip	118
clear lldp neighbors	119
clear lldp statistics	120
clear logging	121
clear mac address-table	122
clear port-security	123
clear running-config factory-defaults	124
clear spanning-tree detected-protocols	125
clear vlan-tunnel ctag-mapping dynamic	126
clock set	127
clock summer-time	128
clock timezone	130
color-aware	131
command prompt	132
configure terminal	134
copy	135
cos remarking	138
cpu-protect safeguard	140
cpu-protect type	142
cpu-protect sub-interface	145
crypto key	146
D	147
ddm log	147
ddm state	148
ddm shutdown	149
ddm temperature	150
ddm voltage	151
ddm bias-current	152
ddm tx-power	153
ddm rx-power	154
default-gateway (management port)	155
default-information originate (BGP)	156
default-information originate (IPv6 OSPF)	157
default-information originate (RIP)	158
default-information originate (RIP IPv6)	159
default ipv6 nd prefix	160
default-metric (OSPF)	161
default-metric (IPv6 OSPF)	162
default-metric (RIP)	163
default-metric (RIP IPv6)	164
default-router	165
delete	166
description	167
dir	168
disable	169
distance	170
dns-server	172
domain-name	173
dos_prevention action	174
dos_prevention type	175
dot1v binding protocol-group	177
dot1v protocol-group	178
dot1x auth-mode	179
dot1x auth-protocol	180
dot1x control-direction	181
dot1x default	182
dot1x forward-pdu	183
dot1x guest-vlan	184
dot1x initialize	186
dot1x max-req	187
dot1x pae authenticator	188
dot1x port-control	189
dot1x re-authenticate	190
dot1x re-authentication	191
dot1x system-auth-control	192
dot1x timeout	193
dot1x user	194
duplex	195
E	196
enable	196
enable password	197
end	198
exit	199
erps	200
erps domain	201
erpi enable	202
erpi type	203
erpi raps-vlan	205
erpi ring-mel	206
erpi ring-port	207
erpi rpl	209
erpi protected-vlan	210
erpi timer	212
erpi tc-propagation	214
errdisable recovery	215
flowcontrol	217
G	217
gvrp (Global)	219
gvrp (Interface)	220
gvrp advertise (Interface)	221
gvrp advertise (VLAN)	222
gvrp dynamic-vlan-creation	223
gvrp forbidden	224
gvrp timer	225
H	226
help	226
host area	227
hybrid vlan VLAN-ID	228
I	229
ingress-checking	229
instance	230
interface	231
interface range	232
interface tunnel	233
ip access-group	234
ip access-list	235
ip address	236
ip address (management port)	238
ip address-list	239
ip dhcp screening ports	240
ip dhcp screening	241
ip dhcp screening trap-log	242
ip dhcp snooping	243
ip dhcp snooping information option	244
ip dhcp snooping trust	245
ip dhcp screening suppress-duration	246
ip arp inspection trust	247
ip arp inspection validate	248
ip arp inspection vlan	250
ip verify source vlan dhcp-snooping	251
ip source binding	252
ip as-path access-list	254
ip community-list	255
ip dhcp snooping verify MAC-address	257
ip dhcp snooping vlan	258
ip dhcp ping packets	260
ip dhcp ping timeout	261
ip dhcp pool	262
ip dhcp relay	263
ip dhcp relay address	264
ip dhcp relay hops	265
ip dhcp relay information check	266
ip dhcp relay information option	267
ip dhcp relay information policy	269
ip dhcp relay information trust-all	270
ip dhcp relay information trusted	271
ip dvmrp	272
ip dvmrp metric	273
ip http server	274
ip http service-port	275
ip igmp access-group	276
ip igmp last-member-query-interval	278
ip igmp query-interval	279
ip igmp query-max-response-time	280
ip igmp robustness-variable	281
ip igmp snooping	282
ip igmp snooping (multicast router)	284
ip igmp snooping immediate-leave	286
ip igmp snooping querier	287
ip igmp snooping static-group	288
ip igmp version	290
ip mroute	291
ip mtu	293
ip mtu (management port)	294
ip multicast-routing	295
ip ospf authentication	296
ip ospf authentication-key	297
ip ospf cost	298
ip ospf dead-interval	299
ip ospf hello-interval	300
ip ospf message-digest-key	301
ip ospf priority	302
ip ospf retransmit-interval	303
ip ospf shutdown	304
ip ospf transmit-delay	305
ip ospf mtu-ignore	306
ip pim	307
ip pim accept-register	308
ip pim bsr-candidate	309
ip pim dr-priority	311
ip pim join-prune-interval	312
ip pim prune-limit-interval	313
ip pim query-interval	314
ip pim register-checksum-include-data	315
ip pim register-suppresion	316
ip pim rp-address	317
ip pim rp-candidate	318
ip pim state-refresh origination-interval	320
ip policy route-map	321
ip rip authentication key-chain	323
ip rip authentication mode	325
ip rip receive version	326
ip rip send version	327
ip rip v2-broadcast	328
ip route	329
ip route multi-path	330
ip ssh	331
ip telnet server	333
ip telnet service-port	334
ip trusted-host	335
ipv6 access-group	337
ipv6 access-list	339
ipv6 address	340
ipv6 address	341
ipv6 address (management port)	343
ipv6 default-gateway (management port)	344
ipv6 dhcp client information refresh minimum	345
ipv6 dhcp client pd	346
ipv6 dhcp relay destination	348
ipv6 enable	350
ipv6 hop-limit	351
ipv6 nd managed-config-flag	352
ipv6 nd other-config-flag	353
ipv6 nd prefix	354
ipv6 nd ra-interval	355
ipv6 nd ra-lifetime	356
ipv6 nd reachable-time	357
ipv6 nd retrans-timer	358
ipv6 nd suppress-ra	359
ipv6 neighbor	360
ipv6 ospf cost	361
ipv6 ospf dead-interval	362
ipv6 ospf hello-interval	363
ipv6 ospf priority	364
ipv6 ospf retransmit-interval	365
ipv6 ospf shutdown	366
ipv6 ospf transmit delay	367
ipv6 rip metric-offset	368
ipv6 rip split-horizon	369
ipv6 rip split-horizon poisoned	370
ipv6 ospf mtu-ignore	371
ipv6 route	372
ipv6 router ospf area	378
ipv6 router rip	379
ipv6 route long prefix log enable	380
ipv6 unicast-routing long-prefix	381
K	383
key	383
key chain	385
key-string	387
L	389
lacp port-priority	389
lacp system-priority	390
lease	391
lldp dot1-tlv-select	392
lldp dot3-tlv-select	395
lldp fast-count	397
lldp hold-multiplier	398
lldp management-address	399
lldp med-tlv-select	401
lldp receive	403
lldp reinit	404
lldp run	405
lldp tlv-select	406
lldp transmit	408
lldp tx-delay	409
lldp tx-interval	410
logging file	411
logging host	412
logging level	414
logging on	415
login	416
logout	417
loopback-detection (interface)	418
loopback-detection (global)	420
loopback-detection mode	421
loopback-detection interval-time	422
M	423
mac access-group	423
mac access-list	424
mac address-table aging destination-hit	425
mac address-table aging-time	426
mac address-table static	427
mac-base ( VLAN )	428
match	429
match as-path	433
match community	434
match ip address	435
match ipv6 address	436
maximum-paths	437
max-rcv-frame-size	438
media-type	439
mgmt-if	440
monitor session	441
monitor session destination remote vlan	443
monitor session source interface	445
monitor session source remote vlan	447
mtu	449
multicast filtering-mode	450
N	451
name	451
neighbor	452
neighbor (RIP IPv6)	453
neighbor advertisement-interval	454
neighbor description	455
neighbor filter-list	456
neighbor peer-group (create group)	457
neighbor peer-group (add group member)	458
neighbor remote-as	459
neighbor route-map	460
neighbor send-community	461
neighbor shutdown	462
neighbor timers	463
neighbor update-source	464
neighbor weight	465
netbios node-type	466
netbios scope-id	467
netbios wins-server	468
network	469
network (BGP)	470
network area	471
next-server	472
P	473
passive-interface	473
passive-interface (IPv6 OSPF)	474
passive interface (RIP)	475
passive-interface (RIP IPv6)	476
password recovery	477
password encryption	481
periodic	482
permit \| deny (ip access-list)	483
permit \| deny (ipv6 access list)	486
permit \| deny (mac access-list)	488
ping	490
poe port priority	492
poe port description	493
poe service-policy	494
poe power-inline	495
police	497
police aggregate	502
police cir	503
policy-map	507
port-channel load-balance	509
power-saving	510
pvid VLAN-ID	511
Q	512
qos aggregate-policer	512
qos bandwidth	515
qos cos	516
qos deficit-round-robin	517
qos dscp-mutation	520
qos map cos-color	521
qos map dscp-color	522
qos map dscp-cos	523
qos map dscp-mutation	524
qos trust	525
R	526
reboot	526
redistribute	527
redistribute (OSPF)	528
redistribute (IPv6 OSPF)	530
redistribute (RIP)	532
redistribute (RIP IPv6)	534
remote-span	536
resequence access-list	537
revision	538
rmon statistics	539
route-map	540
router bgp	542
router-id	543
router-id (IPv6)	544
router ipv6 rip	545
router ipv6 ospf	546
router ospf	547
router rip	548

Match case Limit results 1 per page

DGS-6604

snmp-server host

CLI Reference Guide

851

snmp-server host

Use the command to specify the recipient of a SNMP notification operation. Use

the no command to remove the recipient.

snmp-server host {

IP-ADDRESS

} [version {1| 2c | 3 {auth | noauth | priv }}]

WORD

[

vlan-

interface

]

no snmp-server host {

IP-ADDRESS

}

Default

No host entry exists.

If no version option is specified, the default version is 1.

Command Mode

Global configuration at privilege level 15

Usage Guideline

SNMP notifications are sent as trap packets. If you do not enter an

snmp-server

host

command, no notifications are sent. In order to configure the switch to send

SNMP notifications, you must create at least one recipient of a SNMP notification

snmp-server host

command.

To create an SNMP host where the notification will be sent to, the user can

specify the version of notification packet. For V1 and V2 SNMP, the notification

will be sent in trap protocol data unit (PDU). For V3 SNMP, the notification will be

sent in the SNMPv2-TRAP-PDU with the SNMPv3 header.

Syntax Description

IP-ADDRESS

Name, IPv4 or IPv6 address of the SNMP notification host.

version

(Optional) Version of the SNMP used to send the traps. The default is 1. If you use

the

version

keyword, one of the following keywords must be specified:

• 1

—SNMPv1. This option is not available with informs.

• 2c

—SNMPv2C.

• 3

—SNMPv3. The most secure model, because it allows packet encryption with the

priv

keyword. One of the following three optional security level keywords can follow

the

keyword:

–

auth

— Enables Message Digest 5 (MD5) and Secure Hash Algorithm

(SHA) packet authentication.

–

noauth

—Specifies that the noAuthNoPriv security level applies to this

host. This is the default security level for SNMPv3.

–

priv

—Enables Data Encryption Standard (DES) packet encryption (also

called “privacy”).

WORD

Password-like community string is sent with the notification operation. If the version

is 3, The

COMMUNITY-STRING

is used as the

UserName

defined by the

snmp-

server user

command. The community string that consists of from 1 to 32

characters. The syntax is general string that does not allow space.

vlan-interface

When input IP-ADDRESS is IPv6 link-local address, user must choose an existing

vlan-interface to specify output interface for a destination.