Dell 3115 Color Laser User Guide - Page 173

 e labels that can withstand temperatures of 205°C (401°F) sealing, excessive curling, wrinkling, or releasing hazardous emissi  Do not print within 1 mm (0.04 in.) of the edge of th of the perforations, or between die-cuts of the label.  Do not use label s at have adhesive to the edge of the sheet. Dell recommends zone c f the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive ma ontaminates your multifunction printer and could void your warrant  If zone c the adhesive is not possible, a 3 mm (0.125 in.) strip should be r the leading and driver edge, and a non-oozing adhesive should be us  Remove a 3 mm (0.125 in.) strip from the leadin prevent labels from peeling inside the multifunction printer.  Portrait on is preferred, especially when printing bar codes.  Do not use labels that have exposed adhesiv rint Media For proper print media storage, wing guidelines help avoid media feeding problems and uneven print q  best results, store print media in an environment where the tempera approximately 21°C (70°F) and the relative humidity is  Store cartons of print media on a pallet or shelf, rather ectly on the floor.  f you store individual packages of print media out of the original c nsure that they rest on a flat surface so that the edges do not b rl.  Do not place anything on top of the print me ges. Identifying Print Media Sources and Specifications The following tables provide information on s optional print media sources. Prin a Sizes and Support Multipurpose feeder Standard 250sheet tional 550-sheet paper feeder Optional duplexer A Y Y Y A5 Y Y Y