Dell Alienware 13 R3 Service Manual - Page 24
Replacing the solid-state drive, Procedure
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Replacing the solid-state drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure NOTE: Adhere the thermal pad on the copper foil area, if the thermal pads are shipped with the solid-state drive. 1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive slot. 2 Press the other end of the solid-state drive to align the screw hole on the solid-state drive with the screw hole on the computer base. 24