Dell Alienware 13 R3 Service Manual - Page 46
Removing the touch pad, Prerequisites, Procedure, computer, follow the instructions
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removing the touch pad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the solid-state drive. 4 Remove the rear-I/O cover. 5 Remove the computer base. 6 Remove the battery. Procedure 1 Open the latches and disconnect the touch-pad cable from the system board and touch pad. 46
Removing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your computer
.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance
.
Prerequisites
1
Remove the
base cover
.
2
Remove the
wireless card
.
3
Remove the
solid-state drive
.
4
Remove the
rear-I/O cover
.
5
Remove the
computer base
.
6
Remove the
battery
.
Procedure
1
Open the latches and disconnect the touch-pad cable from the system board
and touch pad.
46