Dell Alienware 13 R3 Service Manual - Page 88
Replacing the camera, Procedure, Post-requisites
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Replacing the camera WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Using the alignment posts, adhere the camera module to the display backcover and antenna assembly. 2 Connect the camera cable to the camera module. 3 Adhere the tape that secures the camera cable to the camera module. Post-requisites 1 Replace the display bezel. 2 Replace the display assembly. 3 Replace the system board. 4 Replace the battery. 5 Replace the coin-cell battery. 6 Replace the computer base. 7 Replace the rear-I/O cover. 8 Replace the solid-state drive. 9 Replace the memory modules. 10 Replace the wireless card. 11 Replace the base cover. 88