Dell Alienware 13 R3 Service Manual - Page 65
Replacing the power-button board, Procedure, Post-requisites
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Replacing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Using the alignment posts, place the power-button board on the palm-rest assembly. 2 Adhere the power-button board cable to the palm-rest assembly. 3 Align the screw holes on the power-button board with the screw holes on the palm-rest assembly. 4 Replace the two screws (M2x3) that secure the power-button board to the palm-rest assembly. Post-requisites 1 Replace the system board. 2 Replace the battery. 3 Replace the heat-sink assembly. 4 Replace the coin-cell battery. 5 Replace the computer base. 6 Replace the rear-I/O cover. 7 Replace the solid-state drive. 8 Replace the memory modules. 9 Replace the wireless card. 10 Replace the base cover. 65