Dell Alienware 13 R3 Service Manual - Page 63
Removing the power-button board, Prerequisites, Procedure, After working inside your
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Removing the power-button board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. 3 Remove the memory modules. 4 Remove the solid-state drive. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the coin-cell battery. 8 Remove the heat-sink assembly. 9 Remove the battery. 10 Remove the system board. Procedure 1 Remove the two screws (M2x3) that secure the power-button board to the palm-rest assembly. 2 Lift the power-button board, along with its cable, off the palm-rest assembly. 63