Dell Alienware 13 R3 Service Manual - Page 62
Replacing the power-adapter port, Procedure, Post-requisites
View all Dell Alienware 13 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Replacing the power-adapter port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Slide the power-adapter port into the slot on the palm-rest assembly. 2 Place the power-adapter port bracket on the power-adapter port. 3 Route the power-adapter port cable through the routing guides on the palm- rest assembly. Post-requisites 1 Replace the system board. 2 Replace the battery. 3 Replace the heat-sink assembly. 4 Replace the coin-cell battery. 5 Replace the computer base. 6 Replace the rear-I/O cover. 7 Replace the solid-state drive. 8 Replace the memory modules. 9 Replace the wireless card. 10 Replace the base cover. 62