Dell Dimension 4700 Owner's Manual - Page 77
Installing a Hard Drive
View all Dell Dimension 4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
small bracket tabs (2) drive bracket drive securing screws (3) Installing a Hard Drive 1 Unpack the replacement hard drive, and prepare it for installation. 2 Check the documentation for the drive to verify that it is configured for your computer. 3 Remove the hard drive bracket (see page 75). 4 Attach the hard drive to the hard drive bracket: a Place the small bracket tabs into the drive-securing screw holes on one side of the drive. b Gently swing the drive toward the bracket and align the three screw holes on the other side of the drive with the screen holes on the bracket. c Attach the hard drive bracket to the hard drive. d Insert and tighten all three drive-securing screws. 5 Install the hard drive: a Place the two bracket tabs into the drive slots inside the bracket for the additional hard drive. b Swing the bracket forward so that it is flush with the bracket for the additional hard drive. c Replace the bracket-securing screws. 6 Connect a power cable to the drive. 7 Connect the data cable to the drive and to the system board (see page 56). 8 Close the computer cover (see page 89). Removing and Installing Parts 77