Dell Dimension 4700 Owner's Manual - Page 79
Remove the hard drive from the bracket.
View all Dell Dimension 4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6 If you are replacing the additional hard drive, remove the drive from the bracket: a Remove the hard drive-securing screws. b Remove the hard drive from the bracket. drive slots (2) bracket tabs (2) front computer frame bracket-securing screw drive bracket bracket-securing screw NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer. NOTICE: When you unpack the drive, do not set it on a hard surface, which may damage the drive. Instead, set the drive on a soft surface, such as a foam pad, that will sufficiently cushion it. 7 Install the additional hard drive: a Place the two bracket tabs into the drive slots inside the computer's front panel. b Swing the bracket forward so that it is flush with the computer's front panel. c Replace the bracket-securing screws. Removing and Installing Parts 79