Dell Inspiron 24 5415 All-in-One Service Manual - Page 60
Installing the antennas, Prerequisites, About this task, Steps, Next steps
View all Dell Inspiron 24 5415 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Installing the antennas Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the antennas and provides a visual representation of the installation procedure. NOTE: Note the location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W (white). Steps 1. Align and place the antenna modules (2) into the slots on the display-assembly base. 2. Adhere the copper foil that secures the antenna cables on both sides of the display-assembly base. 3. Route the antenna cables through the routing guides on the display-assembly base. Next steps 1. Install the power-button board. 2. Install the display hinges. 3. Install the speakers. 4. Install the system board. 5. Install the heat sink. 6. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable. 7. Install the wireless card. 8. Install the memory module. 9. Install the media-card reader. 10. Install the system-board shield. 11. Install the hard drive. 12. Install the I/O cover. 13. Install the back cover. 14. Install the stand. 15. Follow the procedure in After working inside your computer. 60 Removing and installing components