Dell Inspiron 2600 Solutions Guide - Page 80
Remove the module from the connector. - memory slots
View all Dell Inspiron 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
www.dell.com | support.dell.com NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module. 6 If you are replacing a memory module, remove the existing module. NOTICE: Handle memory modules by their edges, and do not touch the components on a module. a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector. The module should pop up. b Remove the module from the connector. securing clips memory module HINT: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure. 7 Ground yourself and install the new memory module: a Align the notch in the module with the slot in the center of the connector. b Slide the edge of the module firmly into the connector, and rotate the module down until you hear a click. If you do not hear the click, remove the module and reinstall it. 80 Adding and Replacing Pa rts