Dell Inspiron 27 7720 All-in-One Owners Manual - Page 54
Hard drive, Removing the hard drive
View all Dell Inspiron 27 7720 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps 1. Align the slots on the system-board shield with the ports on the computer. 2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base. Next steps 1. Install the I/O cover. 2. Install the back cover. 3. Install the stand. 4. Follow the procedure in After working inside your computer. Hard drive Removing the hard drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. About this task The following image indicates the location of the hard drive and provides a visual representation of the removal procedure. 54 Removing and installing Customer Replaceable Units (CRUs)
Steps
1.
Align the slots on the system-board shield with the ports on the computer.
2.
Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1.
Install the
I/O cover
.
2.
Install the
back cover
.
3.
Install the
stand
.
4.
Follow the procedure in
After working inside your computer
.
Hard drive
Removing the hard drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
stand
.
3.
Remove the
back cover
.
About this task
The following image indicates the location of the hard drive and provides a visual representation of the removal procedure.
54
Removing and installing Customer Replaceable Units (CRUs)