Dell Inspiron 27 7720 All-in-One Owners Manual - Page 67
Installing the fan
View all Dell Inspiron 27 7720 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Steps 1. Disconnect the fan cable from the system board. 2. Remove the fan cable from the routing guides on the display-assembly base. 3. Remove the three screws (M2x3.5) that secure the fan to the display-assembly base. 4. Lift the fan, along with its cable, off the display-assembly base. Installing the fan Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the fan and provides a visual representation of the installation procedure. Removing and installing Customer Replaceable Units (CRUs) 67
Steps
1.
Disconnect the fan cable from the system board.
2.
Remove the fan cable from the routing guides on the display-assembly base.
3.
Remove the three screws (M2x3.5) that secure the fan to the display-assembly base.
4.
Lift the fan, along with its cable, off the display-assembly base.
Installing the fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
Removing and installing Customer Replaceable Units (CRUs)
67