Dell Inspiron N5110 Service Manual - Page 67
Replacing the System Board - hard drive removal
View all Dell Inspiron N5110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the System Board 1 Follow the instructions in "Before You Begin" on page 9. 2 Replace the processor module (see "Replacing the Processor Module" on page 80). 3 Replace the thermal cooling assembly (see "Replacing the Thermal-Cooling Assembly" on page 76). 4 Follow the instructions from step 5 to step 7 in "Replacing the Hard Drive" on page 73. 5 Turn the system board assembly over. 6 Slide the connectors on the system board into the slots on the computer base. 7 Gently press the system board to connect the connector on the system board to the connector on the I/O board. 8 Replace the five screws that secure the system board to the computer base. 9 Connect the speaker cable, to the connector on the system board. 10 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55). 11 Replace the display assembly (see "Replacing the Display Assembly" on page 43). 12 Follow the instructions from step 2 to step 7 in "Replacing the Palm-Rest Assembly" on page 34. 13 Replace the memory module (see "Replacing the Memory Module(s)" on page 20). 14 Replace the module cover (see "Replacing the Module Cover" on page 18). 15 Replace the battery (see "Replacing the Battery" on page 16). 16 Replace any cards or blanks removed from the 8-in-1 media card reader. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 17 Turn on the computer. NOTE: After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board. System Board 67