Dell Latitude D630 Service Manual - Page 15

1 top flex-cable connector 4 inverter board 2 flex-cable release levers 3 back of display panel (2) 5 bottom flex-cable connector 6 pull-tab on bottom flex-cable connector Removing the Display Hinges CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer. 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the display panel (see Removing the Display Panel). 5. Remove the M2.5 x 5-mm screw from the right display hinge. 1 M2.5 x 5-mm screw 4 alignment pin 2 display hinges (2) (left and right) 3 top cover 6. Lift the right display hinge off the two alignment pins and out of the top cover. 7. Repeat step 5 and step 6 for the left display hinge. Back to Contents Page