Dell Latitude D630 Service Manual - Page 42
Palm Rest, Replacing the Keyboard, Hinge Cover, Media Bay Devices, Back to Contents Cell
UPC - 683728230456
View all Dell Latitude D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
NOTICE: Ensure that all thermal-cooling pads adhere to both the thermal-cooling assembly and to the appropriate chips. 2. Place the assembly on the system board. 3. Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly. 4. Replace the palm rest (see Palm Rest). NOTE: If necessary, ensure that you reconnect the coin-cell battery (see Coin-Cell Battery) before you replace the keyboard. 5. Replace the keyboard (see Replacing the Keyboard). 6. Replace the hinge cover (see Hinge Cover). 7. Replace the media bay device (see Media Bay Devices). 8. Replace the battery. Back to Contents Page
2.
Place the assembly on the system board.
3.
Tighten in consecutive order the four captive screws, labeled "1" through "4," on the thermal-cooling assembly.
4.
Replace the palm rest (see
Palm Rest
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the hinge cover (see
Hinge Cover
).
7.
Replace the media bay device (see
Media Bay Devices
).
8.
Replace the battery.
Back to Contents Page
NOTICE:
Ensure that all thermal-cooling pads adhere to both the thermal-cooling assembly and to the appropriate chips.
NOTE:
If necessary, ensure that you reconnect the coin-cell battery (see
Coin
-
Cell Battery
) before you replace the keyboard.