Dell M6700 Owner's Manual - Page 40
Installing the ExpressCard Module, Removing the Heat Sink - hard drive
View all Dell M6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4. Remove the screws that secure the ExpressCard module to the computer and remove the ExpressCard module. Installing the ExpressCard Module 1. Insert the ExpressCard module into its compartment. 2. Tighten the screws to secure the ExpressCard module to the computer 3. Connect the ExpressCard cables to the system board and the smart card. 4. Install the: a) palm rest b) primary and secondary hard drive c) optical drive d) keyboard e) keyboard trim f) base cover g) battery h) ExpressCard 5. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: 40
4.
Remove the screws that secure the ExpressCard module to the computer and remove the ExpressCard module.
Installing the ExpressCard Module
1.
Insert the ExpressCard module into its compartment.
2.
Tighten the screws to secure the ExpressCard module to the computer
3.
Connect the ExpressCard cables to the system board and the smart card.
4.
Install the:
a)
palm rest
b)
primary and secondary hard drive
c)
optical drive
d)
keyboard
e)
keyboard trim
f)
base cover
g)
battery
h)
ExpressCard
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
40