Dell M6700 Owner's Manual - Page 46
Installing the I/O Board, Removing the Display Assembly
View all Dell M6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Installing the I/O Board 1. Connect the I/O board connector and slide the I/O board into its slot in the computer. 2. Tighten the screws to secure the I/O board to the computer. 3. Connect the ExpressCard module connector. 4. Install the: a) palmrest b) primary and secondary hard drive c) optical drive d) keyboard e) keyboard trim f) base cover g) battery h) SD card 5. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) keyboard trim d) keyboard e) optical drive f) primary and secondary hard drive g) palmrest 46
Installing the I/O Board
1.
Connect the I/O board connector and slide the I/O board into its slot in the computer.
2.
Tighten the screws to secure the I/O board to the computer.
3.
Connect the ExpressCard module connector.
4.
Install the:
a)
palmrest
b)
primary and secondary hard drive
c)
optical drive
d)
keyboard
e)
keyboard trim
f)
base cover
g)
battery
h)
SD card
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
b)
base cover
c)
keyboard trim
d)
keyboard
e)
optical drive
f)
primary and secondary hard drive
g)
palmrest
46