Dell OptiPlex 380 Service Manual - Page 4

Miscellaneous Devices l Disable l Auto (default) l COM2 l COM4 The Operating System may allocate resources even though the setting is disabled. Enables or disables the following onboard devices: l Front USB l PCI slots l Audio Video Primary Video This field determines which video controller will become the primary video controller when 2 controllers are available in the computer. This selection matters only if there are 2 video controller present. l Auto(default) - Use the add-in video controller. l Onboard/Card - Use the integrated video controller unless a Graphic care is installed. A PCI Express Graphic(PEG) card will override and disable the integrated video controller. Performance Multi Core Support Intel® SpeedStep™ This field specifies whether the processor will have one or all cores enable. The performance of some application will improve with the additional cores. This Option enables or disables the Intel® SpeedStep™ mode of the processor. When disabled, the computer is placed into the highest performance state and the Intel® SpeedStep™ applet or native operating system driver are prevented from adjusting the processor's performance. When enable. the Intel® SpeedStep™, enabled CPU is allowed to operate in multiple performance states. C States Control Limit CPUID Value This option is disabled by default. This option enables or disables additional processor sleep states. The operating system may optionally use these for additional power saving when idle. This option is disabled by default. This field limits the maximum value the processor Standard CPUID Function will support. Some operating systems will not complete installation when the maximum CPUID Function supported is greater than 3. HDD Acoustic Mode This option is disabled by default. This option allows you to optimize your hard drives performance and acoustic noise level based on your personal preferences. l Bypass(default)- Do nothing (needed for older drives) l Quiet- The drive is slower, but quieter. l Suggested - Allow drive manufacturer to select the mode. l Performance- The drive is faster, but possibly noisier. Virtualization Support Virtualization This Option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel® Virtualization Technology. Enable Intel® Virtualization Technology - This option is disabled by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel® Virtualization technology for direct I/O. Trusted Execution Enable Intel® Virtualization Technology for Direct I/O - This option is disabled by default. Field specifies whether a Measured Virtual Machine(MVMM) can utilize the additional hardware capabilities provided by Intel® Trusted Execution Technology. The TPM Virtualization Technology and Virtualization Technology for Direct I/O must be enable to use this feature. Enable Intel® Trusted Execution Technology - This option is disabled by default. Security Administrative Password System Password Password Changes TPM Security Provides restricted access to the computer's system setup program in the same way that access to the computer can be restricted with the System Password option. This option is not set by default. Displays the current status of the system password security feature and allows a new system password to be assigned and verified. This option is not set by default. Enables or disables the user from changing the system password without the administrative password. This option is enabled by default. Enables or disables the trusted platform module (TPM) security. You can set the TPM security to: l Deactivate (default) l Activate l Clear