Dell OptiPlex 5080 Small Form Factor Small Form Factor Setup and specification - Page 27
System information
View all Dell OptiPlex 5080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
System information Table 21. System Configuration Option Description Integrated NIC Allows you to control the onboard LAN controller. The option 'Enable UEFI Network Stack' is not selected by default. The options are: • Disabled • Enabled • Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items that are listed in this section may or may not appear. SATA Operation Allows you to configure the operating mode of the integrated hard drive controller. • Disabled = The SATA controllers are hidden • AHCI = SATA is configured for AHCI mode • RAID ON = SATA is configured to support RAID mode (selected by default) Drives Allows you to enable or disable the various drives onboard: • SATA-0 (enabled by default) • M.2 PCIe SSD-0 (enabled by default) Smart Reporting USB Configuration This field controls whether hard-drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. Allows you to enable or disable the integrated USB controller for: • Enable USB Boot Support • Enable Front USB Ports • Enable Rear USB Ports All the options are enabled by default. Front USB Configuration Rear USB Configuration USB PowerShare Audio Allows you to enable or disable the front USB ports. All the ports are enabled by default. Allows you to enable or disable the back USB ports. All the ports are enabled by default. This option allows you to charge the external devices, such as mobile phones, music player. This option is disabled by default. Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default. • Enable Microphone • Enable Internal Speaker Both the options are selected by default. Dust Filter Maintenance Allows you to enable or disable BIOS messages for maintaining the optional dust filter that is installed in your computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the interval set. The option Disabled is selected by default. • Disabled • 15 days • 30 days • 60 days • 90 days • 120 days • 150 days • 180 days System setup 27