Dell Precision M65 Dell Precision M65 Mobile Workstation Service Manual - Page 15

1 screws (8) 2 display bezel 3 top cover NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel. 5. Starting from the sides of the display panel, use your fingers to separate the bezel from the top cover and lift the bezel away from the top cover. Removing the Display Panel CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the four M2.5 x 5-mm screws from each side of the display panel. 5. Lift the display panel out of the top cover. 1 M2 x 3-mm screws (8) 2 display panel 3 top cover Installing the Display Panel 1. Replace the eight M2.5 x 5-mm screws that secure the display panel to the top cover. 2. Route the display-feed flex cable and antenna cables so that they rest in the notch located in the bottom edge of the top cover.