Dell Unity XT 480 WEEE Li-Ion SPS Disassembly Instructions - Page 32
separate the rear panel from the chassis., Using a Philips screwdriver
View all Dell Unity XT 480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
7. Pull the rear panel away from the chassis and PCB. Figure 34. Separating the rear panel from the chassis. 8. Identify the wires that connect the rear panel to the PCB and disconnect or cut them, and then separate the rear panel from the chassis. 9. Using a Philips screwdriver, remove the six (6) fasteners that secure the PCB to the SPS chassis. Figure 35. Location of the six (6) PCB fasteners WEEE Disassembly Instructions for the Li Ion (SPS), doc #302-000-589 32
32
WEEE Disassembly Instructions for the Li Ion (SPS), doc #302-000-589
7.
Pull the rear panel away from the chassis and PCB.
Figure 34. Separating the rear panel from the chassis.
8.
Identify the wires that connect the rear panel to the PCB and disconnect or cut them, and then
separate the rear panel from the chassis.
9.
Using a Philips screwdriver, remove the six (6) fasteners that secure the PCB to the SPS chassis.
Figure 35. Location of the six (6) PCB fasteners