Denon 3808CI Owners Manual - Page 39

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting A3 Firmware Update Update the firmware of the receiver. [Selectable items] Start : Execute the update process. When updating starts, the power indicator lights red. "Updating zzz" is shown on the display during updating. Once updating is completed, "Updating complete" is displayed. "Latest firmware" is displayed when the firmware is the latest version. b If the display reads as shown below, check the settings and network environment, then update again. Display Updating failed Description Updating failed. Login failed Failure to log into server. Server is busy Server is busy. Wait a while then try again. Connection failed Failure connecting to server. Regist failed Failure registering to server. NOTE • Connection to the network and specific settings are required to update the firmware. For details, see page 20, 32. • Do not turn off the power until updating is completed. • Normally there is no need to use this function, aside from the cases described below. ⋅ The Firmware Update function is only used for updating the firmware (free or for a charge) via the Internet, for example for the purpose of adding functions to the AVR-3808CI in the future. ⋅ Information regarding the Firmware Update function will be announced on the DENON web site each time related plans are defined. ⋅ A broadband connection to the Internet is required to use this function (v page 20). ⋅ Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be completed. Once updating starts, normal operations on the AVR-3808CI cannot be performed until updating is completed. Furthermore, updating the firmware may reset the backup data for the parameters, etc., set for the AVR-3808CI. Language This sets the language used on the display screens. F Menu tree F Manual Setup Language [Selectable items] English Français Operating from the main unit q Press and hold the STATUS and RETURN buttons for at least 3 seconds. "Video Format" appears on the display. w Use the ui button to set "GUI Language". e Use the o p button to make the setting. r Press the ENTER, MENU or RETURN button to complete the setting. Source Select Use this procedure to select the input source and make the settings related to playing input sources. Input Source Selection F Menu tree F Source Select TUNER PHONO CD DVD HDP TV/CBL SAT VCR DVR V.AUX NET/USB XM Operating from the main unit or main remote control unit GOperation on the main unitG Turn the SOURCE SELECT knob. b If "Rec Select" or "Video Select" is selected for the input source, press the SOURCE button before turning the SOURCE SELECT knob. GOperation on the main remote control unitG Press the SOURCE SELECT button. The desired input source can be selected directly. (Main unit) (Main remote control unit)