Denon 3808CI Owners Manual - Page 61
Resetting the Microprocessor - microprocessor reset
UPC - 081757507646
View all Denon 3808CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Resetting the Microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. 1 Turn off the power using . 2 Press while simultaneously pressing and . 3 Once the display starts flashing at intervals of about 1 second, release the two buttons. If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. 58
µ¸
Getting Started
Connections
Setup
Playback
Remote Control
Multi-Zone
Information
Troubleshooting
Resetting the Microprocessor
Perform this procedure if the display is abnormal or if
operations cannot be performed.
When the microprocessor is reset, all the settings are
reset to their default values.
1
Turn off the power using
<POWER>
.
2
Press
<POWER>
while
simultaneously
pressing
<STANDARD>
and
<DSP SIMULATION>
.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
If in step 3 the display does not flash at intervals of about 1 second,
start over from step 1.
Getting Started
Connections
Setup
Playback
Remote Control
Multi-Zone
Information
Troubleshooting
Getting Started
Connections
Setup
Playback
Remote Control
Multi-Zone
Information
Troubleshooting