Denon 3808CI Owners Manual - Page 47

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting g Night Mode Optimized setting for late-night listening. Picture Adjust Adjust the picture quality. [Selectable items] OFF Low Middle High Operating from the main remote control unit Press the NGT button. The " " indicator lights when "Low", "Middle" or "High" is selected. OFF Low Middle High F Menu tree F Parameter Picture Adjust a Contrast s Brightness d Chroma Level f Hue h Audio Delay Compensate for mismatched timing between video and audio. Delay audio. This sets the delay time for audio signals. [Variable range] 0 ms ~ 200 ms a Contrast Adjust picture contrast. [Variable range] -6 ~ 0 ~ +6 s Brightness Adjust picture brightness. Operating from the main unit or main remote control unit q Press the AUDIO DELAY button on the main unit or the A. DL button on the main remote control unit. w Use the o p button to set. • This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front" set to "Large", "Tone Defeat" to "ON" and "Room EQ" to "OFF"). • The adjustment range is 0 to 100 ms when the Auto Lipsync Correction function is activated. [Variable range] 0 ~ +12 d Chroma Level Adjust picture chroma level (saturation). [Variable range] -6 ~ 0 ~ +6 f Hue Adjust color hue. [Variable range] -6 ~ 0 ~ +6 Information Status Shows information about current settings. F Menu tree F Information Status a MAIN ZONE s ZONE2/3 a MAIN ZONE Shows information about settings for main zone. The items displayed differ according to the input source. [Items to be checked] Select Source Name Surround Mode Input Mode Assign Room EQ Video Select Src Level Rec Select Night Mode RESTORER etc. s ZONE2/3 Shows information about settings for multi-zone. [Items to be checked] Power Select Source Volume Level • Adjusting the "Contrast", "Brightness", "Chroma Level" and "Hue" settings does not affect the HDMI input signal. • "Hue" can be adjusted for composite video and S-Video signals. • The adjustment values are stored for the individual input sources.